Panasonic KX-TDA30 Installation Manual page 32

1.4.3 System Capacity
AC Adaptor Capacity
The following load figures can be supported.
Supplied AC Adaptor only
Supplied AC Adaptor and Additional AC Adaptor
If the load figure exceeds 96, it cannot be supported by the KX-TDA30. In this case, use the KX-TDA100 with M-Type Power Supply
*1
Unit (PSU-M), or the KX-TDA200 with either PSU-M or L-Type Power Supply Unit (PSU-L).
Calculation Example
Other DPT/Other DSS console (except
KX-DT300 series/KX-T7600 series/
KX-T7560/KX-T7565)
CS
ISDN Telephone
Total
The total load figure is 33. As this exceeds 32, you need to connect an additional AC adaptor.
32 Installation Manual
Connected AC Adaptor
Equipment Type
4 units
3 units
5 units
Maximum Load Figure
32
96
*1
Load Figure
16
12
5
33