Backup Battery Connection - Panasonic KX-TDA30 Installation Manual

Hybrid ip-pbx
Hide thumbs Also See for KX-TDA30:
Table of Contents

Advertisement

2.2.6 Backup Battery Connection

2.2.6 Backup Battery Connection
The backup batteries and Back-up Battery Cable provide a backup power supply to allow full use of the PBX
in the event of a power failure. In case of power failure, the backup batteries automatically maintain the power
to the PBX without interruption.
User-supplied Items
Backup Batteries: VRLA (Valve Regulated Lead Acid) 12 V DC ´ 3
Back-up Battery Cable: KX-A228
WARNING
There is a danger of explosion if backup batteries are incorrectly replaced. Replace only with the
same or equivalent type recommended by the battery manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
CAUTION
Make sure that the Back-up Battery Cable is securely fastened to both the backup batteries and the
PBX.
Be sure to comply with applicable local regulations (e.g., laws, guidelines).
Make sure that the polarities of the backup batteries and wiring are correct.
Make sure that you do not short the backup batteries or cables.
Note
Turn on the power switch of the PBX only after the installation of the PBX is finished and AC power is
available.
The recommended maximum capacity is 14 Ah, to maintain effective battery charge.
Make sure that the type and capacity of the 3 backup batteries are identical.
The Back-up Battery Cable should not be exposed to direct sunlight. Keep the Back-up Battery Cable
and the backup batteries away from heating appliances and fire. Place the backup batteries in a
ventilated place.
For details about the backup batteries, refer to the manual for the batteries.
Backup Power Supply Duration
The length of time that backup batteries can power the PBX varies depending on the total load figure. For how
to calculate the load figure from the connected items, refer to "Load Figure Calculation".
Examples
Battery Capacity
14 Ah
*1
The duration may vary depending on the conditions.
44
Installation Manual
Total Load Figure
32
96
Backup Power Supply Duration
9 h
3 h
*1

Advertisement

Table of Contents
loading

Table of Contents