Wall Mounting (Kx-Tda30) - Panasonic KX-TDA30 Installation Manual

2.2 Installation of the Hybrid IP-PBX
2.2.9

Wall Mounting (KX-TDA30)

CAUTION
Drive mounting screws into the wall. Be careful to avoid touching any metal laths, wire
laths or metal plates in the wall.
1.
Place the reference for wall mounting on the last page of this manual on the wall to mark
three screw positions.
2.
Install the screws and washers (included) to the wall.
Washer
Drive the screw
to this position
Notes
• Make sure that the screw heads are at the same distance from the wall.
• Install the screws perpendicular to the wall.
3.
Hook the main unit on the screw heads.
Notes
• Do not block the openings of the cabinet. Allow space of at least 10 cm above and at
the sides of the cabinet.
• Make sure that the wall behind the cabinet is flat and free of obstacles, so that the
openings on the back of the cabinet will not be blocked.
• Make sure that the wall behind the cabinet is not made of wood.
46 Installation Manual
250 mm
Wooden
Wall