Parameters; Hot Keys; Assigning Hot Keys - Eventide Eclipse User Manual

Factory programs ship with their most salient parameters "linked" to the
only doing some "light tweaking," stick to the
area at all.
PARAMETER
The area gets you "inside" a program, so to speak. In it, you can change the underlying algo-
PARAMETER
rithms loaded into the effects blocks, the routing between the effects blocks, or the parameters of the un-
derlying algorithms themselves.
Programs 100 through 199 comprise the Eclipse's set of "algorithms"
the separately provided "Eclipse Algorithms" document for details)
are "tweaks" and combinations of these elemental algorithms. Press the
gorithm or algorithms a given program is "built" on. To the right, we see that the
gorithm is running on effects block A (
FXB
block B ( ). Because the
to access all of its parameters. However, as we've said before, the
gram's most important parameters.
All of the changes that you make in the
gram in the
PROGRAM
OK, the Eclipse has a cute little screen and sometimes you have to dig to get to the parameter you want to
adjust. That can be a drag, especially if the parameter is one that you access often. The
was created to improve this situation. Here's the idea - pick a program parameter that you want to access
quickly and assign it to the
area to access that parameter
KEYS
. You can assign any program parameter in the Eclipse to a hot key, and the factory presets
original position)
ship with their most vital parameters linked to hot keys.
You can view

HOT KEYS

4 Param
you can select
shown to the right.
Up to eight hot keys can be assigned for a given program, and the assignments will be saved or updated
with the currently loaded program. When you load a new program, the assignments saved with the new
program will populate the
rameters (such as
PARAMETER
(BRIGHT)
).

Assigning Hot Keys

Let's assign a hot key to
page of the area by pressing the
LEVELS
Next, press and hold the
(HOT KEY)
Use to select the hot key "slot" to which you'd like to assign
{IN GAIN}
.
Release 4.0.1
Eclipse User Manual
. Programs 200 through 499
FXA
), and that the
dual modfilters
HOT KEYS
area. Well, almost all –
area. Then next time instead of digging, you just go to the
HOT KEYS
(you can still dig if you want to, however, the parameter will always exist in its
1 Param
in the standard
SETUP MODES (DISPMODE)
eter mode under
area; it doesn't matter if the assignments are to program-specific pa-
HOT KEYS
(ROUTING)
page 2
{IN GAIN}
in the
LEVELS
LEVELS
{IN GAIN}
soft key.
Page 33 of 66

Parameters

area - you need not venture into the
HOT KEYS
dual modfilters
algorithm is running on
or areas are saved and loaded with a pro-
PARAMETER
see Bypassing Effects Blocks on page 39
Hot Keys
eter per page mode or
) or to "global" parameters (such as
area. Get to the first
key.
area. So, if you're
HOT KEYS
(see
key to see what al-
PARAMETER
fm modfilter/pan
algorithm is running on effects
FXB
, you would press
area will "link" to a pro-
HOT KEYS
.
HOT KEYS
as
SETUP DISPLAY
Eclipse User Manual
al-
<EDIT FXB>
area
HOT