Updating Programs; Comparing The Current Program With The Saved Program; User Groups; Removing Programs - Eventide Eclipse User Manual

Updating Programs

If you make changes to a program that you've already saved, you can
store those changes without messing around with numbers, names, and
flags
(this is like the "save" command on a computer, as opposed to the "save as"
. Press
command) PROGRAM
asks if you really want to update the program. Press
<NO>
if you don't.

Comparing the Current Program with the Saved Program

Before updating your program, you may wish to do a comparison be-
tween the current, edited program, and the previously saved version.
<COMPARE>
Press to toggle between the saved version of the preset
and the edited version. A
are listening to the saved version of the preset (instead of the current, edited version).

User Groups

There are ten "user groups" available for your own organizational pur-
poses. When you save a program, you can flag it (
SAVE DBASE (USERGRP)
that when you choose
your saved programs are organized as you see fit.
You can name the User Groups under
(NUMBER)
a to rename, then use
the key saves the name.
SETUP
Unfortunately, programs take up space. Eventually you'll run out of space. Eventually you'll find that you
don't use some of the programs that you used to use. Out with the old to make space for the new, right?
To remove a program, first load the program you want to remove. Re-
turn to the
PROGRAM
Next, press
PROGRAM
To avoid accidents, Eclipse will want to be sure that you are sure before
removing a possibly important program.
Hey! You can't remove factory programs!

Removing ALL Your Saved Programs

You can remove all your internal programs in one fell swoop by press-
UTILITY
ing page 3
SETUP
programs saved on the memory card.

Checking free space in internal memory or a card

To find out how much of the internal memory has been used (or is free),
UTILITY (FREE MEM).
go to page 3
SETUP
Release 4.0.1
Eclipse User Manual
<UPDATE>
page 2
PROGRAM – COMPARE
) as being in one or more of these banks so
User Grp PROGRAM CRITERIA (SEARCH B)
under
SETUP
NAME
to actually rename it. Pressing
 see page 32 to learn how to name things

Removing Programs

area. Here we've loaded "
<REMOVE>
page 2 .
<CLEAR> <YES>
page 2
Page 31 of 66
. A dialog box pops up that
<YES>
if you do; press
message will flash on the screen to indicate that you
page 2
PROGRAM
USERGRP
page 2 . Choose
Ringdelays
."
. This will not affect
,
Eclipse User Manual