Tempo Mode; Tempo-Controlled Parameters: T_Delay, T_Rate, Etc; Tutorial 1: Loading A Program, Setting The Tempo, And Assigning Modulation - Eventide Eclipse User Manual

SETUP TEMPO (TAP SRC)
MIDI Clock Set
tempo from a MIDI sequencer connected to the Eclipse's
MIDI input.
 See page 47 for information about enabling Midi Clock output.
SETUP TEMPO (TAP SRC)
Externals Set
number between 1 and 16) to control the tempo from
external controller inputs.
 See page 43 for more information about Externals.
When you save or update a program, the current tempo is saved along with
it. This saved tempo will replace the current tempo the next time the pro-
gram is loaded.
You can disable the tempo by setting
 Additional explanations and diagrams can be found on page 26. We highly recommend checking them out!

Tempo Mode

When a program is saved, the current tempo setting is always saved as
part of the program. However, it might be desirable to ignore the tempo
stored in a program and instead have Eclipse maintain a constant tempo
SETUP TEMPO ( MODE )
setting. The
set to the program's tempo when the progra m is loaded. To maintain the
current tempo setting when loading a program, choose
the system tempo to the saved value when loading a program, choose
Prog
.

Tempo-Controlled Parameters: T_DELAY, T_RATE, etc.

You'll notice many parameters with "
their names. These parameters synchronize to the tempo. For example,
(T_RATE)
to the right we see
chorus depicted will oscillate once every
If you want the chorus to ignore the tempo, set
(RATE)
the unadorned
If you want every parameter in the Eclipse to ignore the tempo, set
TEMPO (TAP SRC)
to
 See page 35 for a more in-depth discussion of "T_" parameters. See page 26 for a diagram of the tempo and its
relation to "T_" parameters.

Tutorial 1: Loading a Program, Setting the Tempo, and Assigning Modulation

OK, we're going to run you through "a day in the life of your Eclipse"! First, turn it on.
We want to load a program, and that's the sort of thing that happens in
the " area." So, press the
PROGRAM
The Eclipse sorts its programs so that the type of program you want to
load is easily found. Press
Number
the display reads
until the display reads
the type of instrument the program was designed for)
Eclipse User Manual
Eclipse User Manual
SETUP TEMPO (TAP SRC)
determines whether Eclipse will be
T_
" stuck onto the beginning of
. Its values are rhythmic, and right now the
1/2 note
soft key to enter in a rate.
Off
.
PROGRAM
CRITERIA (SORT BY)
(SEARCH B)
. Then press
Source (this will allow us to search for a program based on
.
Page 16 of 66
Midiclock
to to control the
extx x
to (where
Off
to
Global
. To update
.
(T_RATE) off
to and use
SETUP
key!
and turn the knob until
and turn the knob
is a
.
Release 4.0.1