Connecting The Printer To A Network, As/400, Or Mainframe - Intermec EasyCoder 4420 Getting Started Manual

Connecting the Printer to a Network, AS/400, or Mainframe

You can connect your 4420 or 4440 printer to Novell NetWare networks, token ring networks, or
other TCP/IP networks. You can also connect your printer to an AS/400 (or other midrange
system) or an IBM mainframe.
•
To connect the printer to a network, you must have a network interface adapter (for
example, Ethernet). The network interface adapter connects to the parallel port of the printer.
•
To connect the printer to an AS/400 or a mainframe, you need to have an interface adapter card
installed in the optional I/O board port of your printer.
For Connecting To
Network
AS/400
Mainframe
16
You Need
Network interface adapter
Twinax adapter card
Twinaxial cable
Coax adapter card
Coaxial cable
Intermec Part Number
Contact Intermec or purchase separately
056835
Purchase cable equivalent to IBM part
number 7362267 or 7362062
056836
Purchase cable equivalent to IBM part
number 2577672 or 1833108