Shutdown - Silicon Graphics IRIS Workstation User Manual

Operation

5.5 Shutdown

The IRIS Workstation should not be left on indefinitely. However, since the
Monitor has a long warmup period, the IRIS Workstation should be left on
continuously during work hours.
WARNING: Do not press either
Power
UNIX without first using the /etc/reboot -q command listed
below. If the IRIS Workstation is under the control of the
PROM Monitor, then the
switch may be safely used.
1. To shut down UNIX, type the /etc/reboot -q command.
2. Set the
Version 1.0
switch while the IRIS Workstation is running
$ /etc/reboot -q
NOTE: /etc/reboot -q is a privileged command,
requiring super-user permission.
switch on the Cabinet to the
Power
IRIS WORKSTATION GUIDE
button or the
Reset
buttons and the
Reset
Off
Power
position.
25