Silicon Graphics IRIS Workstation User Manual page 146

140 IRIS WORKSTATION GUIDE
uucp -r file mhtsd!/tom
The -r option forces the job to be queued but does not invoke the daemon to
process the job. The uucico command can then be invoked directly:
/usr/lib/uucp/uucico -r1 -x4 -smhtsd
the -r1 option is necessary to indicate that the daemon is to start up in master
mode (i.e., it is the calling system). The -x4 specifies the level of debugging
that is to be printed. Higher levels of debugging can be printed (greater than
4) but requires familiarity with the internals of uucico. If several jobs are
queued for the remote system, it is not possible to force uucico to send one
particular job first. The contents of LOGFILE should also be monitored for any
error indications that it posts. Frequently, problems can be isolated by
examining the entries in LOGFILE associated with a particular system. The file
ERRLOG also contains error indications.
Appendix I:
Version 1.0