Silicon Graphics IRIS Workstation User Manual page 68

64 IRIS WORKSTATION GUIDE
SORRY. NO lost+found DIRECTORY
There is no lost+found directory in the root directory of the file system; fsck ignores
the request to link a file in lost+found. This will always invoke the CLEAR error
condition in Phase 4. Check access modes of lost+found.
SORRY. NO SPACE IN lost+found DIRECTORY
There is no space to add another entry to the lost+found directory in the root
directory of the file system; fsck ignores the request to link a file in lost+found.
This will alwavs invoke the CLEAR error condition in Phase 4. Check size and
contents of lost+found.
(CLEAR)
The inode mentioned in the immediately previous error condition can not be
reconnected. See Section 4.2.2.
Possible responses to the CLEAR prompt are:
YES de-allocate the inode mentioned in the immediately previous error
condition by zeroing its contents.
NO ignore this error condition.
LINK COUNT
COUNT=X SHOULD BE Y (ADJUST)
The link count for inode I which is a file, is X but should be Y. The owner O,
mode M, size S, and modify time T are printed. See Section 4.2.2.
Possible responses to the ADJUST prompt are:
replace the link count of file inode I with Y.
YES
NO ignore this error condition.
LINK COUNT
COUNT=X SHOULD BE Y (ADJUST)
The link count for inode I which is a directory, is X but should be Y. The owner
O, mode M, size S, and modify time T of directory inode I are printed. See
Section 4.2.2.
Possible responses to the ADJUST prompt are:
replace the link count of directory inode I with Y.
YES
FILE I=I OWNER=O
DIR I=I OWNER=O
MODE=M SIZE=S
MODE=M SIZE=S
Appendix B:
MTIME=T
MTIME=T
Version 1.0