Silicon Graphics IRIS Workstation User Manual page 34

30 IRIS WORKSTATION GUIDE
Command
h
t
[file]
n
d
[file]
d
[pathname]/
d *
tb
[file]
tb
tb *
r
1. Start multi-user mode.
2. Set the date. The input format of the date command is
"mmddhhmmyy"
example,
A UNIX login prompt will then appear.
3. Log into a UNIX account. The IRIS Workstation is shipped with
three user accounts: rootcsh, root and guest. The rootcsh account is a
privileged account with a C Shell environment. The root account is
a privileged account with a Bourne Shell environment. The guest
account is a sample user account with a C Shell environment. New
accounts may be added by the system administrator (see Section
6.7).
Display a list of PROM Monitor commands.
Enter serial interface to host.
Boot file over a network.
Boot defaultboot from a disk. Similar to the Disk Drive
Boot procedure.
Boot file from a disk.
List the contents of directory pathname.
Boot defaultboot from a tape drive. The file must be in cpio
format. Similar to the Tape Drive Boot procedure.
Boot file from a tape drive. The file must be in cpio
format.
List the contents of a tape in cpio format.
Restart the PROM Monitor.
Table 6-1: PROM Monitor Commands
# multi
[month-day-hour-minute-year(optional)].
Is the date Wed Mar 21 14:16:42 PST 1984? (y or n) n
Enter the correct date: 0322091484
Is the date Thu Mar 22 09:14:01 PST 1984? (y or n) y
...
login:
...
System Administration
Description
For
Version 1.0