Silicon Graphics IRIS Workstation User Manual page 66

62 IRIS WORKSTATION GUIDE
Phase 1 or Phase 1b have found duplicate blocks or bad blocks associated with
directory entry F, directory inode I. The owner O, mode M, size S, modify
time T, and directory name F are printed. See Section 4.2.3 and 4.2.4.
Possible responses to the REMOVE prompt are:
YES the directory entry F is removed.
NO ignore this error condition.
DUP/BAD I=I
(REMOVE)
Phase 1 or Phase 1b have found duplicate blocks or bad blocks associated with
directory entry F, inode I. The owner O, mode M, size S, modify time T, and
file name F are printed. See Section 4.2.3 and 4.2.4.
Possible responses to the REMOVE prompt are:
YES the directory entry F is removed.
NO ignore this error condition.
Phase 3: Check Connectivity
This phase concerns itself with the directory connectivity seen in Phase 2. This
section lists error conditions resulting from unreferenced directories, and
missing or full lost+found directories.
UNREF DIR
(RECONNECT)
The directory inode I was not connected to a directory entry when the file
system was traversed. The owner O, mode M, size S, and modify time T of
directory inode I are printed. See Section 4.4 and 4.2.2.
Possible responses to the RECONNECT prompt are:
reconnect directory inode I to the file system in the directory for lost
YES
files (usually lost+found). This may invoke the lost+found error
condition in Phase 3 if there are problems connecting directory
inode I to lost+found. This may also invoke the CONNECTED error
condition in Phase 3 if the link was successful.
NO ignore this error condition. This will always invoke the UNREF
error condition in Phase 4.
SORRY. NO lost+found DIRECTORY
OWNER=O MODE=M
I=I OWNER=O
SIZE=S MTIME=T
MODE=M SIZE=S
Appendix B:
FILE=F
MTIME=T
.
Version 1.0