Silicon Graphics IRIS Workstation User Manual page 71

Appendix B:
Possible responses to the CONTINUE prompt are:
YES ignore the rest of the free-block list and continue the execution of
fsck. This error condition will always invoke the DUP BLKS IN
FREE LIST error condition in Phase 5.
NO terminate the program.
BAD FREEBLK COUNT
The count of free blocks in a free-list block is greater than 50 or less than zero.
This error condition will always invoke the BAD FREE LIST condition in Phase
5. See Section 4.1.2.
X BAD BLKS IN FREE LIST
X blocks in the free-block list have a block number lower than the first data
block in the file system or greater than the last block in the file system. This
error condition will always invoke the BAD FREE LIST condition in Phase 5.
See Section 4.1.2 and 4.2.4.
X DUP BLKS IN FREE LIST
X blocks claimed by inodes or earlier parts of the free-list block were found in
the free-block list. This error condition will always invoke the BAD FREE LIST
condition in Phase 5. See Section.4.1.2 and 4.2.3.
X BLK(S) MISSING
X blocks unused by the file system were not found in the free-block list. This
error condition will always invoke the BAD FREE LIST condition in Phase 5.
See Section 4.1.2.
FREE BLK COUNT WRONG IN SUPERBLOCK (FIX)
The actual count of free blocks does not match the count in the super-block of
the file system. See Section 4.1.3.
Possible responses to the FIX prompt are:
YES replace the count in the super-block by the actual count.
NO ignore this error condition.
Version 1.0
IRIS WORKSTATION GUIDE 67