Testing The Printer; Figure 7: Sample Test Ticket - Nanoptix PayCheck Slim Service Manual

1.6 Testing the Printer

This test can be used to verify the correct operation of the printer. The test prints a resident
ticket listing the current printer settings. This ticket can also be used to verify the printing quality.
To print the test ticket, power-on the printer while pressing and holding the Paper Feed Button
(figure 3) for approximately 3 seconds. A test ticket similar to the one below will be printed
approximately 5 seconds later. Press the paper feed button once more and the ticket will feed.
Pressing the button again will result in blank tickets.
Document # 720006-0000
August, 2011
Model:
Firmware:
Protocol:
COMMUNICATION
Interface:
Baud Rate:
Data Bits:
Parity:
Handshaking:
Print mode:
Aux Port:
PRINT CONTROL
Print Method:
Speed:
Black Bar Index:
No HPQ Burn time:
Motor Current:
Real-Time Command:
Auto Reset Status:
PRINTER ENVIRONMENT CONDITIONS
Voltage:
Temperature:
SYSTEM RESOURCES
FLASH: -Used: 0
-Free: 65535
LIBRARY INVENTORY
Templates: 0,1,2,3,4,5,6,7,8,9,A,B
Regions:1,2,3,4,5,6,7,8,h,9,A,B,C,D,E,F,G,I,J,K,L,N,O,P,Q,R,
S,T, U,Z,X,a,b,c,d,e,f,g,i,j,k,l,m,n,o,p,q,
Fonts:0,1,2,3,4,5,7,8,9,P,E,A,B
Graphics:
MANUFACTURING INFORMATION
Printer ID:
Date Code:
A to D: 03b4, 020e, 01cc, 03fe
Dip Switch Config (1234) : 0000
STATUS:
*s|0|PAY-1.79U|@|@|@|H|@|P|*

Figure 7: Sample Test Ticket

Service Manual
PAYCHECK 3
PAY-1.79U
NTL
Serial
9600
8
NONE
PRT+RTS
NTL
Disabled
No HPQ
150 mm/sec
Right
275 us
2
Enabled
Enabled
23.8 Volts
24 Celcius
ffffffff
9