Table of Contents
Advertisement
1.7 Testing the Printer
Run this test to check the printer. The test prints and cuts a resident configuration ticket
and a performance report. Verify these tickets to ensure unit is printing and operating
correctly.
To print these tickets, power-on the printer while pressing and holding the Paper Feed
Button (Figure 3) for approximately 3 seconds.
approximately 5 seconds later.
Model:
Firmware:
Protocol:
COMMUNICATION
Interface:
Baud Rate:
Data Bits:
Parity:
Handshaking:
Print Mode:
Aux Port:
PRINT CONTROL
Print Method:
Final Speed:
Black Bar Index:
No HPQ Burn Time:
Cutter PWM:
Motor Current:
PRINTER ENVIRONMENT CONDITIONS
Voltage:
Temperature:
SYSTEM RESOURCES
FLASH: -Used: 0
MANUFACTURING INFORMATION
Printer ID:
Date Code:
A to D: 03ca, 01e4, 01e6, 03d0
STATUS:
*S| 0
720007-0000R
July 2013
High Speed Video Lottery Thermal Printer
-Free: 24576
|HSVL-1.38U|@|@|@|H|@|P
Figure 11: Configuration Ticket
The test tickets will be printed
DSP-HPQ
HSVL – 5.15B
E-T88
Serial
9600
8
NONE
PRT+RTS
Line
Disabled
No HPQ
250 mm/sec
Disabled
400 us
80 %
3
24.4 Volts
20 Celsius
VL00000
YYYYMMDD
| *
Owner's Manual
12
Advertisement
Table of Contents
