Dedicated Micros DV-IP Decoder Setup Manual page 55

The screen shot shows the default settings for each of the features that utilises a port number
as part of its communication path.
It is possible to redefine the port allocation for FTP, telnet and HTTP, how this is achieved is
detailed in the Configuration section of this manual.
The telemetry control, audio port and engineering debug are default settings and are not
configurable; these port numbers must be given to the Network Manager to ensure there are no
other devices on the network using these ports.
Using a telnet session it is possible to telnet to a specific port to obtain debug information, for
example at the DV-IP prompt enter:
Telnet <IP address or DV-IP Decoder> 5201
This will download debug information on the Engineering port, the following is an example of the
information obtained:
Dedicated Micros Page 53