Dv-Ip Decoder Tools; System Variable; Reset - Dedicated Micros DV-IP Decoder Setup Manual

DV-IP Decoder Tools

There are a number of tools that are supported on-board the DV-IP Decoder itself. These can be
accessed through the web interface and are available for testing system parameters and
obtaining information for fault finding.
To access the Tools option:
1. Select the Configuration option on the web interface
2. Enter the username and password (default setting dm and web)
3. Select the Tools tab, the tools available are:
System Variables

Reset

System Variable

This page can be used for system diagnostics as it provides a readable
overview of the configuration parameters of the DV-IP Decoder. Any
information that has been configured and stored on the Decoder will be shown
on the file. Typical information is; camera titles, alarm title. It identifies the
Value, Variable Name and the Description.
Note: This information may be useful when contacting Dedicated Micros for system analysis.
Reset
This will reset the unit. Remember to save all configuration settings before
resetting the unit as information not saved will be lost.
Page 44 Dedicated Micros