User.ini; Webuser.ini; Urlprofiles.ini - Dedicated Micros DV-IP Decoder Setup Manual

USER.ini

A number of features on the DV-IP Decoder are password protected; these have default
usernames and passwords. The features that can be enabled for authentication are FTP, telnet
and serial communication.
The user.ini file contains the username and password information for these features and is also
the interface to enable or disable password protection.
The example shows the default usernames and passwords and which of these features are
enabled on the DV-IP Decoder when shipped from the factory.
[FTP]
dm=ftp
[Telnet]
dm=telnet
[Serial]
# dm=serial
# serial=password

WEBUSER.ini

The WEBUSER.ini file contains the username and passwords for accessing the web
configuration pages on the DV-IP Decoder.
The first example shows the default username and password for accessing the web
configuration pages on the DV-IP Decoder.
##################################################################
#
# DV-IP Webuser.ini Version 18th May 2004
#
##################################################################
# ——————————————————————————————————
# Note: This file requires a blank line at the end of this file.
# Note: Line with #— are comments. i.e. #— Username(s) Password(s)
# ——————————————————————————————————
[WebPage Configuration]
# — Username(s) Password(s) —
dm=web

urlprofiles.ini

When making connections to NetVu Connected video servers that are password protected it is
necessary to configure the urlprofiles.ini file on the Decoder with the username and password
information for all video servers that will make a connection to the Decoder.
Page 50
#
#
#
Dedicated Micros