Step 1 Connecting The Rack Mounting Brackets - Dedicated Micros DV-IP Decoder Setup Manual

Step 1 Connecting the Rack Mounting Brackets

Please note the DV-IP Decoder is heavy. Always follow health and safety guidelines when lifting
the unit from the box or installing the DV-IP Decoder unit. When rack mounting the unit it is
important that both the front and rear brackets are installed to correctly support the unit in the
rack, failure to do this may result in damage of the unit.
A rack mounting kit is supplied with this product, it is important to install this correctly. The kit
comprises of:
4 x Rack mount screws
2 x Front Rack mount ears
2 x Rear supports
Before connecting any cables to the DV-IP Decoder connect the rack mounting kit:
Attach the rear supports to the rack that the DV-IP Decoder will sit in, these will support the
weight of the unit.
Using the supplied screws, attach the rack mount ears to each side of the unit.
Position the unit on the rear supports.
Attach the rack mount ears to the front of the rack.
Page 12 Dedicated Micros