How To Enable System Logs - Dedicated Micros DV-IP Decoder Setup Manual

How to Enable System Logs

There are numerous actions that the DV-IP Decoder can be configured to
automatically carry out on receipt of; an alarm, VMD activation, Schedule
function, etc. When these triggers are received and the actions initiated then it
is possible to log this information within the DV-IP Decoder System Logs.
By default the DV-IP Decoder will log illegal file access and telnet/FTP users, to
enable the other functions:
1. Select Logs -> System Logs Set-up
2. If connect/dial using PPP has been configured within the alarm and VMD pages enabling this
option will log all the PPP actions
3. If the DV-IP Decoder has been configured to transmit file to an FTP server enabling this
function will log all FTP transactions
4. Save the configuration by selecting Save Settings!
Function
Log anonymous FTP
connections
Log illegal file access
Log Telnet/FTP users
Dedicated Micros
Description
This identifies when an unauthorised user tries to access the DV-IP Decoder by
entering anonymous in the username or password.
Any web access to a CGI protected directory or non-existent file will be logged with
an IP address, time and type of action
This will log users that are trying to gain access to the DV-IP Decoder using an FTP
or telnet session
Page 39