Dedicated Micros DV-IP Decoder Setup Manual page 24

2. Change the password for the relevant function, here is an example of the original settings;
note that the Serial user name and password are commented (#) out as this is not enabled by
default.
3. Save the changes and then upload the file to the unit.
Multiple user names and passwords can be allocated to each function, simple add the
information under the relevant heading, e.g.
[FTP]
dm=ftp
psmith=manager
jjones=admin
This will give three usernames and passwords for accessing the FTP function.
4. Reset the unit for the new Username(s) to take affect
Page 22 Dedicated Micros