Appendix A - Resetting The Dv-Ip Decoder; Reset Using The Web Interface - Dedicated Micros DV-IP Decoder Setup Manual

Appendix A - Resetting the DV-IP Decoder

Reset using the Web Interface

Some features require that the DV-IP Decoder to be reset for changes to take effect, for
example, those held in non-volatile memory.
There is a correct procedure when resetting the Decoder that must be followed:
1. Within the web interface, select Configuration from the Home page
2. Enter the username and password (default settings are dm and web)
3. Select System -> Reset, the following screen will appear:
4. Click Yes, the following screen will be displayed
The reset happens immediately on confirmation of reset, and the countdown represents the
period until the web pages can be accessed again.
When the DV-IP Decoder is available again the Main Setup page will be displayed.
Dedicated Micros Page 45