CyberData 010844D Setup Manual page 35

7. After clicking on the Save Settings button, a reboot timer countdown will begin.
8. After the speaker reboots, the green Status LED on the speaker will blink at one second
9. To test the speaker, pick up any phone that is configured to the Cisco Call Manager system and
10. When a connection is established (as indicated by a beep), speak into the phone and verify that
This step completes the procedure.
Server Setup Guide
intervals to indicate normal operation.
Note If Yes is selected for Speaker Beep After Initialization on the Speaker Configuration
page, you will hear a tone after the initialization sequence is complete.
call the speaker's extension number.
you can hear your voice through the speaker.
Figure 4-36. Speaker Reboot Timer
930280B CyberData Corporation
35