CyberData 010844D Setup Manual page 32

32
4.9.2 Setting Up the CyberData Device Parameters
To setup CyberData device parameters,
CyberData Corporation
1. To register the speaker, you will need to enter the information from Cisco Call Manager section
into the speaker by logging into the CyberData Configuration Home page.
Log into the CyberData Configuration Home page
speaker's IP address.
Figure 4-34. CyberData Ceiling Speaker Home Page
SIP Config button
Note You may also download CyberData's VoIP Discovery Utility program which allows you
to easily find and configure the default web address of the CyberData VoIP products.
CyberData's VoIP Discovery Utility program is available at the following web address:
http://www.cyberdata.net/support/voip/discovery_utility.html
2. Type the username and password to log into the CyberData Ceiling Speaker Home Page.
(Figure
930280B
4-34) by pointing your browser to the
Server Setup Guide