CyberData 010844D Setup Manual page 31

4.9 Setup CyberData Device Parameters
4.9.1 Using the Operations Guide for Initial Configuration
1. Go to the Paging Endpoints webpage by either going to the following link or navigating
2. Find your Speaker model on the Paging Endpoints webpage and click on the Go to product
3. Select the Documentation tab as shown in
Server Setup Guide
For the initial configuration of the Speaker, refer to the IP Speaker Operation Guide which can
be found by completing the following steps:
through the menus to the webpage as shown in
http://www.cyberdata.net/products/voip/digitalanalog/paging_endpoints
Figure 4-31. Menu Navigation to the Paging Endpoints Webpage
page link for your specific Speaker model as shown in
Note If you have and older Speaker model and you cannot find your Speaker model on the
Paging Endpoints webpage, then your Speaker model may be available on the
following End-of-Life SIP-enabled IP Paging Endpoints webpage:
http://www.cyberdata.net/products/voip/digitalanalog/legacypaging_endpoints.html
Speaker model.
Figure
Figure 4-32. Go to product page Link
Model
example
Figure 4-33
Figure 4-33. Documentation Tab
930280B
4-31:
Figure 4-32.
to find the Operations Guide for your
CyberData Corporation
31