CyberData 010844D Setup Manual page 19

10. Scroll down to the Device Security Profile drop-down menu
6
Save button Media Termination Point Required
11. In the SIP Profile drop-down menu, select Standard SIP Profile.
12. In the Digest User drop-down menu, select the name that you typed into the Description field
13. Click to check the box next to Media Termination Point Required.
14. Click on the Save button at the bottom of the page. Wait for the page to refresh and you will see
6
Server Setup Guide
Party SIP Device Basic-Standard SIP Non-secure Profile.
Figure 4-17. Phone Configuration Page
in Select the name that you typed into the Description field in
New User in Cisco Call Manager".
the following popup window that says
take effect
. Click on the OK button.
Figure 4-18. Click on the Reset Phone Button Dialog Window
Digest User SIP Profile
Click on the Reset Phone Button to have the changes
930280B
(Figure 4-17), and select Third-
Device Security Profile
Step 3 of Section 4.5, "Setup a
CyberData Corporation
19