Registration Status - Cisco TelePresence Administrator's Manual

Overview and status information

Registration status

Registration status information can be displayed for both current and historic registrations. If the VCS is part
of a cluster, all registrations that apply to any peer in the cluster are shown.
The Registrations by device
n
registered with the VCS, and allows you to remove a device's registration. If the VCS is part of a cluster, all
registrations across the cluster are shown. Note that an H.323 device can register with more than one
alias; in such cases this page will show only one alias and (when present) one E.164 number for that
device. Note also that a single device can support both the SIP and H.323 protocols; in such a case the
SIP registration and the H.323 registration will appear as separate entries on this page.
The Registrations by alias
n
and prefixes used by all endpoints and systems currently registered with the VCS. Note that a single H.323
device can register with more than one alias, and each will appear as a separate entry on this page.
The Registration history
n
longer current. It contains all historical registrations since the VCS was last restarted.
The following information is displayed:
Field Description
Name For H.323 devices, this is one of its aliases. If the device has registered with more than one alias, this
will be (in order of preference) its H.323 ID, URI or email address. For MCUs and Gateways this will be
its alias or, if it has not registered an alias, one of its prefixes. For SIP devices, this is its SIP AOR.
Number For H.323 devices that have registered one or more E.164 numbers, the first will be shown here. For
SIP devices this will always be blank because they cannot register E.164 numbers. (This is shown in
the Alias column in the registration by alias view.)
Alias The H.323 alias, E.164 number, prefix or SIP AOR registered by a device. (Registration by alias view
only.)
Type Indicates the nature of the registration. This will most commonly be Endpoint, MCU, Gateway, or SIP
UA.
The registration by alias view shows whether the alias is an H.323 ID, E.164 number, prefix or SIP
AOR.
Protocol Indicates whether the registration is for a SIP or H.323 device.
Creation The date and time at which the registration was accepted.
time If an NTP server has not been configured, this will say Time not set.
Address For H.323 devices this is its RAS address, and for SIP UAs it is the Contact address presented in the
REGISTER request.
End The date and time at which the registration was terminated. (Registration history view only.)
time
Duration The length of time that the registration was in place. (Registration history view only.)
Reason The reason why the registration was terminated. (Registration history view only.)
Peer Identifies the cluster peer to which the device is registered.
Actions Click View to go to the
registration.
Cisco VCS Administrator Guide (X8.1.1)
page (Status > Registrations > By
page (Status > Registrations > By
page (Status > Registrations >
Registration details page to see further detailed information about the
device) lists each device currently
alias) lists all the aliases, E.164 numbers
History) lists all the registrations that are no
Registration status
Page 328 of 507