Configuring Administrator Accounts - Cisco TelePresence Administrator's Manual

User accounts

Configuring administrator accounts

The Administrator accounts
accounts that have been configured on the VCS, and lets you add, edit and delete accounts.
Default administrator account
The VCS has a default local administrator account with full Read-write access. This account is used to
access the VCS using the web UI, the API interface or the CLI. Note that you can still access the VCS via
the admin account even if a Remote authentication source is in use.
The username for this account is admin (all lower case) and the default password is TANDBERG (all upper
case). You cannot delete the default administrator account or change its admin username, but you should
change the password as soon as possible. Choose a strong password, particularly if administration over IP is
enabled. The access level of the default admin account cannot be changed from Read-write but it is possible
to disable its web and API access.
If you forget the password for the admin account, you can log in as another administrator account with read-
write access and change the password for the admin account. If there are no other administrator accounts,
or you have forgotten those passwords as well, you can still reset the password for the admin account
providing you have physical access to the VCS. See
Additional administrator accounts
You can add additional local administrator accounts, which can be used to access the VCS over the web and
API interfaces, but not the CLI.
The configurable options are:
Field Description
Name The username for the administrator account.
Access The access level of the administrator account:
level
Read-write: allows all configuration information
to be viewed and changed. This provides the
same rights as the default admin account.
Read-only: allows status and configuration
information to be viewed only and not changed.
Some pages, such as the
blocked to read-only accounts.
Auditor: allows access to the
Configuration
Overview pages only .
Default: Read-write
Cisco VCS Administrator Guide (X8.1.1)
page (Users > Administrator
Upgrade page, are
Event Log,
Log, Network Log, Alarms
accounts) lists all the local administrator
Resetting forgotten passwords [p.274]
Usage tips
Some names such as "root" are reserved. Local
administrator account user names are case
sensitive.
The access permissions of the currently logged
in user are shown in the system information bar
at the bottom of each web page.
The access level of the default admin account
cannot be changed from Read-write.
and
Configuring administrator accounts
for details.
Page 263 of 507