Cisco TelePresence Administrator's Manual page 440

Reference material
Command reference — xConfiguration
Policy FindMe Server Address: <S: 0, 128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the remote FindMe Manager.
Example: xConfiguration Policy FindMe Server Address: "userpolicy.server.example.com"
Policy FindMe Server Password: <S: 0, 82>
Specifies the password used by the VCS to log in and query the remote FindMe Manager. The maximum plaintext length is 30
characters, which will then be encrypted.
Example: xConfiguration Policy FindMe Server Password: "password123"
Policy FindMe Server Path: <S: 0, 255>
Specifies the URL of the remote FindMe Manager.
Example: xConfiguration Policy FindMe Server Path: "service"
Policy FindMe Server Protocol: <HTTP/HTTPS>
Specifies the protocol used to connect to the remote FindMe Manager. Default: HTTPS.
Example: xConfiguration Policy FindMe Server Protocol: HTTPS
Policy FindMe Server UserName: <S: 0, 30>
Specifies the user name used by the VCS to log in and query the remote FindMe Manager.
Example: xConfiguration Policy FindMe Server UserName: "user123"
Policy FindMe UserDeviceRestriction: <Off/On>
Controls if users are restricted from adding, deleting or modifying their own devices. Default: Off.
Example: xConfiguration Policy FindMe UserDeviceRestriction: Off
Policy Services Service [1..20] DefaultCPL: <S: 0,255>
The CPL used by the VCS when the remote service is unavailable. Default: <reject status='504' reason='Policy Service Unavailable'/>
Example: xConfiguration Policy Services Service 1 DefaultCPL: "<reject status='403' reason='Service
Unavailable'/>"
Policy Services Service [1..20] Description: <S: 0,64>
A free-form description of the Policy Service.
Example: xConfiguration Policy Services Service 1 Description: "Conference management service"
Policy Services Service [1..20] HTTPMethod: <POST/GET>
Specifies the HTTP method type to use for the remote service. Default: POST.
Example: xConfiguration Policy Services Service 1 HTTPMethod: POST
Policy Services Service [1..20] Name: <S: 0,50>
Assigns a name to this Policy Service.
Example: xConfiguration Policy Services Service 1 Name: "Conference handler"
Policy Services Service [1..20] Password: <S: 0,82>
Specifies the password used by the VCS to log in and query the remote service. The maximum plaintext length is 30 characters,
which will then be encrypted.
Example: xConfiguration Policy Services Service 1 Password: "password123"
Policy Services Service [1..20] Path: <S: 0,255>
Specifies the URL of the remote service.
Example: xConfiguration Policy Services Service 1 Path: "service"
Cisco VCS Administrator Guide (X8.1.1) Page 440 of 507