Cisco TelePresence Administrator's Manual page 27

Introduction
All references to OCS/Lync B2BUA have been renamed to refer to Lync B2BUA. The Enhanced OCS
n
Collaboration option key is now called Microsoft Interoperability.
References to 'Movi' have been changed to 'Jabber Video'.
n
The FindMe configuration
n
On the Upgrade page, the VCS platform component is now referred to as System platform.
n
The Advanced account security
n
Maintenance > Advanced
The Local VCS inbound ports
n
ports page is now called
The advanced zone configuration Empty INVITE allowed setting is now referred to as Send empty
n
INVITE for interworked calls.
The following settings have been removed from the
n
and Require Duo Video mode. They existed to provide support for interoperability issues with old
versions of Cisco TelePresence MXP endpoints. These settings can still be configured via the CLI if
necessary.
The Login account authentication configuration
n
authentication source and FindMe authentication source settings are now on the
LDAP configuration
The xConfiguration Interworking Require Invite Header Mode is now Off by default.
n
The Directory option has been removed from the list of restriction policies on the
n
configuration page and the list of Call Policy modes on the
The DNS lookup tool includes Unified Communications SRV services.
n
Cisco VCS Administrator Guide (X8.1.1)
page is now accessed directly under
page is now called
security.
page is now called
Local outbound ports.
page.
Applications >
Advanced security and is accessed via
Local inbound ports, and the
SIP configuration page: Require UDP BFCP mode
page has been removed, and the Administrator
Call Policy configuration
What's new in this version?
FindMe.
Local VCS outbound
Login account
Registration
page.
Page 27 of 507