Cisco TelePresence Administrator's Manual page 502

Reference material
TMS Agent database credentials included within local authentication database lookups
In addition to any manually created entries, the Cisco VCS now checks credentials stored within the TMS
Agent database when the device authentication database type is set to Local database.
This makes it easier to enable authentication on the Cisco VCS when provisioning is using passwords
originating from TMS.
Other enhancements and usability improvements
You can now configure up to 200 SIP domains.
n
You can now configure up to 10,000 local authentication database credentials.
n
Full support of RFC 5806: any SIP diversion headers received in a 302 response are now maintained in the
n
outgoing INVITE message.
Improved zone status reporting: the zones summary page now shows separate SIP and H.323 connection
n
status information.
Table sorting indicators: tabular displays now indicate by which column each table is sorted.
n
A filter facility has been added to the
n
Chrome web browser is now supported; Internet Explorer 6 is no longer officially supported.
n
The administrator no longer has to log out and log back in again after reconfiguring DNS server addresses.
n
There is a new Call signaling routed mode advanced zone profile setting for neighbor zones. It controls
n
whether the zone always takes the signaling or uses the system-wide Call routed mode setting.
There is a new H.323 call signaling port advanced zone profile setting for neighbor zones. It identifies the
n
call signaling port on the neighbor system to use if Automatically respond to H.323 searches is set to
On.
SSH and SCP clients are no longer available in the VCS operating system.
n
Reverse Path Filtering (RFC1812) is enabled by default. This ensures that the VCS will only accept
n
packets on interfaces from source addresses to which there are valid routes in the routing table for that
interface. This change may necessitate the adding of additional static routes on dual-interface VCSs to
ensure the VCS routing table matches the network topology.
Cisco VCS Administrator Guide (X8.1.1)
Subzones list page.
Software version history
Page 502 of 507