Cisco TelePresence Administrator's Manual page 261

User accounts
The Configuration Log
n
and can be used as an audit trail. This is particularly useful when you have multiple administrator accounts.
More than one administrator session can be running at the same time. These sessions could be using the
n
web interface, command line interface, or a mixture of both. This may cause confusion if each
administrator session attempts to modify the same configuration settings - changes made in one session
will overwrite changes made in another session.
You can configure account session limits and inactivity timeouts (see
n
access settings [p.40]).
If the system is in advanced account security
n
logging in. It shows the recent activity of the currently logged in account.
See the Configuring administrator accounts [p.263]
FindMe accounts
FindMe accounts are used by individuals in an enterprise to configure the devices and locations on which
they can be contacted through their FindMe ID.
Each FindMe account is accessed using a username and password.
If local FindMe account authentication is selected, each FindMe account must be created locally by the
n
VCS administrator.
If remote FindMe account authentication is selected, the VCS administrator must set up FindMe groups to
n
match the corresponding group names in the remote directory service. Note that only the username and
password details are managed remotely. All other properties of the FindMe account, such as the FindMe
ID, devices and locations are stored in the local VCS database.
See the Configuring FindMe accounts [p.271]
details and their associated FindMe devices and locations, and for enabling basic Starter Pack provisioning.
We recommend that you use Cisco TMS if you need to provision a large number of FindMe accounts. See
Cisco TMS Provisioning Extension Deployment Guide
accounts.
Root account
The VCS provides a root account which can be used to log in to the VCS operating system. The root account
should not be used in normal operation, and in particular system configuration should not be conducted using
this account. Use the admin account instead.
See the Using the root account [p.275]
Note: remember to change the passwords for the admin and root accounts from their default values.
Cisco VCS Administrator Guide (X8.1.1)
records all login attempts and configuration changes made using the web interface,
mode, a
section for more information about defining FindMe account
section for more information.
Configuring system name and
Login history page is displayed immediately after
section for more information.
for more details on configuring FindMe and user
About user accounts
Page 261 of 507