Cisco TelePresence Administrator's Manual page 476

Reference material
FeedbackRegister
Activates notifications on the event or status changes described by the expressions. Notifications are sent in XML format to the
specified URL. Up to 15 expressions may be registered for each of 3 feedback IDs.
ID: <1..3>
The ID of this particular feedback request.
URL(r): <S: 1, 256>
The URL to which notifications are to be sent.
Expression.1..15: <S: 1, 256>
The events or status change to be notified. Valid Expressions are:
Status/Ethernet
Event/
Event/CallFailure
Status/Zones
Status/Feedback
Event/ResourceUsage
Event/RegistrationFailure
Example: xCommand FeedbackRegister ID: 1 URL: "http://192.168.0.1/feedback/" Expression.1:
"Status/Calls" Expression.2: "Event/CallAttempt"
FindRegistration
Returns information about the registration associated with the specified alias. The alias must be registered on the VCS on which the
command is issued.
Alias(r): <S: 1, 60>
The alias that you wish to find out about.
Example: xCommand FindRegistration Alias: "john.smith@example.com"
Fips
Sets FIPS140-2 cryptographic mode.
Command: <leave/enter/status>
Either enters, leaves or provides the current status of the system's FIPS140-2 cryptographic mode.
Example: xCommand Fips Command: enter
ForceConfigUpdate
Forces the relevant configuration on this peer to be updated to match that of the cluster master.
This command has no parameters.
Example: xCommand ForceConfigUpdate
Cisco VCS Administrator Guide (X8.1.1)
Status/Calls
Status/NTP
Event/Bandwidth
Event/RegistrationAdded
Event/CallAttempt
Status/ExternalManager
Event/AuthenticationFailure
Command reference — xCommand
Event/CallDisconnected
Status/Registrations
Status/LDAP
Event/Locate
Event/RegistrationRemoved
Event/CallConnected
Page 476 of 507