Cisco TelePresence Administrator's Manual page 21

Introduction
Page Description
element
Field level An information box appears on the configuration pages whenever you either click on the
information Information icon or click inside a field. This box gives you information about the particular
field, including where applicable the valid ranges and default value. To close the
information box, click on the X at its top right corner.
Information The VCS provides you with feedback in certain situations, for example when settings have
bar been saved or when you need to take further action. This feedback is given in a yellow
information bar at the top of the page.
Sorting Click on column headings to sort the information in ascending and descending order.
columns
Select All Use these buttons to select and unselect all items in the list.
and
Unselect All
Mandatory Indicates an input field that must be completed.
field
Peer-specific † When a VCS is part of a cluster, most items of configuration are applied to all peers in a
configuration cluster. However, items indicated with a
item peer.
System The name of the user currently logged in and their access privileges, the system name (or
Information LAN 1 IPv4 address if no system name is configured), local system time, currently selected
language, serial number and VCS software version are shown at the bottom of the page.
Note that you cannot change configuration settings if your administrator account has read-only privileges.
Cisco VCS Administrator Guide (X8.1.1)
† must be specified separately on each cluster
About this guide
Page 21 of 507