Toshiba Strata AirLink Installation Manual page 99

Table 29 Alarm Descriptions by Number(continued)
Alarm # Alarm #
(decimal) (hex)
204 CC
207 CF
208 D0
256 D9
N/A N/A
Critical Alarm Relay
When a critical alarm is detected, a relay on the BSIA is triggered and LED S3 flashes. The relay
activates an external alarm, if one is installed (see installation instructions and specifications in
"Step 3: (Optional) Activate External Critical Alarm" on Page
To reset the alarm relay and determine the cause of the critical alarm, check the critical alarm
report in the Strata AirLink Manager. Checking the critical alarm report also stops the flashing
LED.
LEDs
There are LEDs on the BSIA (controller) that give continuous system status and assist in
diagnosing symptoms. When the BSIA system is powered on, all BSIA LEDs except for PWR,
RLOS1, and RLOS2 go through these changes:
o LEDs are lit for one second to show that they all work.
o LEDs turn OFF for a brief moment.
o LEDs light again.
o Each LED is turned OFF as the LED passes the test.
If an LED remains lit after the boot tests complete, one or more hardware integrity tests have
o
failed. Call processing software usually starts even if some of the tests fail, although some
failures prevent call processing software from starting.
o The MASTER LED remains lit during boot up because it does not respond to a boot test.
o The PWR LED is always lit when the BSIA has power. The RLOS LEDs flicker during boot
tests and are lit when there is a problem with Base Station connections.
Strata AirLink Installation Guide
TIMEOUT_IN_BS_SW_UPGRADE
The software upgrade process failed. Check the cable between the PC and
BSIA and try again.
INVALID_MSG_BEFORE_UTAM_ACTIV
The system must be UTAM activated. See
Page 13.
UTAM_ACTIVITION_CODE_IS_OLD
INCOMPATIBLE_BS_SW_VERSION
The software version of one of the Base Stations is not compatible with the
BSIA software. Upgrade the system software.
UTAM_ACTIVATION_FAILED
A failure occurred during the UTAM activation process. A new UTAM
activation code is needed. Contact Toshiba Activation Desk at (949) 598-
4980.
5/00
Maintenance and Troubleshooting
Description
"Set Up Temporary Installation"
21).
Troubleshooting
on
89