Step 16: Enable Utam - Toshiba Strata AirLink Installation Manual

Step 16: Enable UTAM

1. From the Desktop Toolbar,
click the UTAM Activation
icon.
2. Click Get UTAM Code from
RWIU.
3. Enter the password
LABUTAM.
4. Click OK twice.
5. Click Get UTAM code from
RWIU.
6. Click OK.
7. Click Send UTAM
Activation Code to RWIU.
8. Input the 10-digit code given
to you by the Activation Desk
9. Press Enter.
Strata AirLink Installation Guide
The Desktop Toolbar displays.
The new 20-digit UTAM activation code displays. Call the
UTAM Activation desk at (949) 598-4980 between the
hours of 8:00 a.m. and 5:00 p.m. (Pacific Standard Time),
Monday through Friday with this number.
The Desktop Toolbar displays.
"Permission granted successfully" displays. If an error
message displays, repeat Steps 1~7.
If UTAM is required, the Base Stations have one
Note
power LED ON (green), two (center) transmission
LEDs ON (red), and four additional LEDs that are
red.
5/00
RWIU System Installation
Step 16: Enable UTAM
3356
3357
3358
55