Discharge Batteries; Password Protection - Toshiba Strata AirLink Installation Manual

3. When LEDs change to green,
charging is complete.
4. Remove the handset or spare
battery.

Discharge Batteries

1. Insert the battery into the
charger base rear pocket.
2. Remove the battery, when the
LED changes to green.

Password Protection

Table 22 lists functions in the handset that are accessed by password. Some of the functions are for
use by Toshiba technical support only.
Table 22 Handset Password-protected Functions
Function
Bulker DU
Unique Base Station
Software version
Beep on Roam
Handoff by Recall
Reset to factory defaults
Strata AirLink Installation Guide
The charger switches to a trickle charge. When the handset
is fully charged, the front pocket LED changes to green
and the rear pocket LED changes to red, indicating an in-
progress charge.
Important!
o Do not use an incomplete, charged battery, even if the
battery icon shows full strength. The handset will
have reduced talk/standby time.
If a fully charged battery is placed in the charger, it
o
will detect the charged condition and cancel rapid
charging. The LED changes to amber, red, and then
green.
If the LED alternates between green and amber, leave the
battery in the charger to complete discharging.
After the discharge cycle completes, the LED changes to
red to indicate rapid charging is in progress.
Access to functions.
Locks the handset onto a Base Station with a particular ID. Zero (0)
means normal operation.
Displays handset's software version.
Causes an idle handset to beep when the Base Station it is locked onto
changes.
Enables 5&/ to initiate handoff to another Base Station in the system
while a call is in progress.
Restores the handset to factory default settings. All changes made via
the handset menu are removed.
5/00
Maintenance and Troubleshooting
Meaning
Maintenance
73