Toshiba Strata AirLink Installation Manual page 44

BSIA System Installation
Step 9: Configure System
Programming Sheets
Table 5 System Settings
Parameter
System ID
Base Station 1 ID
Base Station 2 ID
Stop Ringing Time
Dial Tone Delay
DTMF Cycle Duration
DTMF Off Duration
Hookflash Duration
FT Pause Duration
FT Inter-event Pause
Second Base Station
Service Enabled
1. For example, a setting of 2 means 2 x 100 ms or 200 ms.
2. The Dial Tone Delay eliminates the possibility of a user dialing before the office telephone system is ready.
3. For example, a setting of 2 means 2 x 10 ms or 20 ms.
34
Description
ID for the system (written on the
RWIU label).
ID of the first Base Station.
ID of the second Base Station.
Length of time the RWIU waits
after last detection of ring voltage
on a line before it stops the ring.
Time delay between pressing
2 &$// and outpulsing DTMF
tones.
Duration of the full DTMF cycle
(length of tone plus length of
silence between tones) for dialing
and other telephone system
operations.
Duration of silence between
DTMF tones.
Duration of the hookflash in
signaling the office telephone
system.
Duration of pause events in the
Feature Table.
Duration of pause between events
in the Feature Table.
Enables service for a second
Base Station. TRUE if a second
Base Station is installed. FALSE if
only one Base Station is installed
or out of order.
Units/ Suggested
Range Setting
1~5
0~31
0~31
1
100 ms 45
1
100 ms 2
3
10 ms 20
3
10 ms 10
1
100 ms 5
1
100 ms 10
1
100 ms 1
NA
Strata AirLink Installation Guide
Your
Setting
5/00