BSIA System Installation
BSIA Additional Information
Initial Configuration Change
It is highly recommended that you get the current configuration and save it to a file on the PC as
the working copy. Then, open and edit the working copy – not the original file. Using this method
ensures that the original configuration file is not corrupted while adding or editing existing data.
Once the new information is saved, the BSIA uses the new data immediately.
Important!
Password Change
1. From the Desktop
2. Open the Configure
3. Select Preferences
4. Enter the old and
Base Station Addition
1. From the Desktop
2. Open the Configure
40
Sending configuration information to the BSIA overwrites existing information.
Make sure that the sent data contains all of the required configuration information,
not just the few additions or changes that were made.
Toolbar, click the
Configuration icon.
Window.
from the menu bar
and Password.
new password and
click OK.
Toolbar, click the
Configuration icon.
Window.
Strata AirLink Installation Guide
3268
5/00