Using Daily Timer - JVC UX-A70MDR Instructions Manual

3
Set the timer-off time.
1) Press ¢ or 4 repeatedly to adjust the hour.
2) Press SET.
The minute digit starts flashing.
3) Press ¢ or 4 repeatedly to adjust the
minute.
4) Press SET.
The source name flashes in the main display.
4
Select the source to record.
1) Press ¢ or 4 repeatedly to select the source.
• Each time you press the buttons, the source changes
as follows:
FM
• When you select FM or AM as the source, press
SET, then select a preset number by pressing ¢
or 4.
• When you select AUX and operate an external
equipment with the Recording Timer, the
equipment also need to have the timer function.
2) Press SET.
"MD REC" appears in the main display.
3) Press SET again.
The recording length mode appears in the main
display.
5
Select the recording length mode.
1) Press ¢ or 4 repeatedly to select the
recording length mode (SP/LP2/LP4).
• Each time you press the buttons, the source changes
as follows:
SP REC
LP4 REC
2) Press SET.
The MD REC indicator stops flashing and remains
lit on the display.
The contents of this setting appear in the main
display.
6
Press to turn off this unit.
AM
AUX
LP2 REC
To turn off the Recording Timer after its setting is done
1 Press CLOCK/TIMER repeatedly until "REC" appears
in the main display.
2 Press CANCEL.
"REC off" appears in the main display, and the timer
( ) and MD REC indicators go off from the display.
To turn on the Recording Timer, press SET.
The timer ( ) and MD REC indicators light on the
display. The settings you have done are shown in the
main display for your confirmation.
Recording Timer will be canceled and the unit will
not turn off automatically in the following.
• When you press 7 (while recording.)
• When you turn off the Recording Timer (see above.)

Using Daily Timer

With Daily Timer, you can wake up to your favorite music
or radio program.
• You can set Daily Timer whether the unit is turned on or
in standby mode.
• To correct a mis-entry any time during the setting
process, press CANCEL.
How Daily Timer actually works
The unit automatically turns on, and starts playing the
specified source when the timer-on time comes. Then,
when the timer-off time comes, the unit automatically turns
off (stands by).
Daily Timer works every day, and the timer settings remain
stored in memory until you reset them or unplug the AC
power cord.
1
Press CLOCK/TIMER repeatedly until Daily ON
time appears in the main display.
The timer ( ) indicator lights, and the DAILY
indicator starts flashing on the display.
The hour digit of the timer-on time starts flashing.
• Each time you press the button, the timer mode
change as follows:
No indication
(canceled)
Clock setting
(clock time)
– 43 –
REC ON 0:00
ON 0:00 DAILY