Assigning The Disc Title And Track Title - JVC UX-A70MDR Instructions Manual

Assigning the Disc Title and Track Title

You can assign a name to each MD and to each track using
alphabetic characters (uppercase and lowercase), symbols
and numerals. Once a title is assigned, it is displayed for
your confirmation.
• You cannot edit titles composed of more than 64
characters.
About the number of characters inputted for an MD
The total number of characters that can be input for an MD is
1792. The maximum number that can be input for a disc title is
64, and for each track title, 61. (However, the actual number
you can input may be slightly less than this maximum numbers
due to the MD limitations — see page 48)
• A space can be counted as one character.
• When the stereo long-hour recording (LP2 or LP4, see page
30) method is used for recording, the maximum number you
can input for a track title automatically reduced since "LP:"
and a space are automatically added to the beginning of the
track title. Consequently this reduces the total number of
characters you can input for an MD.
Example: You can input up to 10 characters for each track if
an MD is composed of 120 tracks recorded using the stereo
long-hour recording method.
In the following example, the process is explained from the
very first — that is, inserting a disc. If you have already
started recording or playing, start from step 2 .
• To exit from the title entry screen any time during the
process, press TITLE/EDIT repeatedly.
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE/EDIT once.
The source is changed to "MD."
The MD recorder enters one of the following title entry
screen.
• Disc title entry screen: appears when you press
TITLE/EDIT when the MD recorder stops.
• Track title entry screen: appears when you press
TITLE/EDIT while playing, pausing or recording.
Ex. While playing track 1.
3
Press Ø or ø to change the title entry mode.
• Each time you press the button, the title entry mode
changes as follows:
DISC TITLE?
Last track title
4
Press SET to enter the selected title entry mode.
Character entry position
Ex. Track 8 has no title.
5
Input a character.
1) Press DISPLAY/CHARA to select the character
set you want.
• Each time you press the button, the character set
changes as follows:
Capital letters
2) Press the character entry button for a character
you want to input.
Examples:
• To input an "A" or "a," press ABC once.
To input a "B" or "b," press ABC twice.
To input a "C" or "c," press ABC three times.
• To input a symbol, press MARK repeatedly until
the mark you want appears.
• To input a numeral, press 0 – 9.
• To move the character entry position while
entering a title, press Ø or ø.
• To enter a space while entering a title, press Ø
twice.
• If you have entered an incorrect character, press
CANCEL to cancel the last entry.
– 39 –
Ex. Track 8 is selected.
1 TITLE? 2 TITLE?
3 TITLE?
Character set
Small letters
Numerals & Symbols