Using The Timer; Setting The Sleep Timer; Setting The Daily Timer - JVC RV-NB90 Instructions Manual

Using the timer

Setting the sleep timer

Press SLEEP.
SLEEP
SLEEP 10
Each time you press the button, the shut-
off time (in minute) changes as follows:
10 \ 20 \ 30 \ 60 \ 90 \ 120 \ 150
\ 180 \OFF \ (back to the beginning)
To check the remaining time until the
System shuts off, press SLEEP once.
To cancel the sleep timer, press SLEEP
repeatedly to select "OFF. "

Setting the daily timer

Using the daily timer (Playback timer), you can
wake up with your favorite music.
NOTE
• Set the clock before setting the daily timer
(page 10).
• Tune into an FM station, load a disc, or
connect a USB device/iPod to the System,
and make sure that the source works
properly beforehand.
• Preset the desired FM station before setting
the daily timer (page 12).
• Daily timer does not work when the power
is supplied through the batteries. Supply
the power through an AC outlet.
1. Press CLOCK/TIMER repeatedly until
the "PLAY TMR" appears on the display
window.
PLAY TMR
2. Press CLOCK/TIMER again.
ONAM12:00
3. Press UP or DOWN to adjust the hour of
the starting time.
• When you press and hold the button,
the hour digit changes continuously.
4. Press SET.
5. Repeat 3 and 4 to adjust the minute of
the starting time, the hour and minute
of the finish time, and select the source
and the volume.
OFAM12:00
• When FM tuner is selected as the source,
select a preset number using UP or
DOWN and then press SET.
• When CD or USB is selected as the
source, select a track number using UP
or DOWN and then press SET.
6. Press to turn off the System.
• The daily timer works only when the
System is turned off.
• While the timer is set, the timer indicator
lights up.
• While the timer is working,
flashes.
• Once set, the daily timer works every
day.
• You can not set the same time for the
starting time and finish time.
To go back to the previous step, press CANCEL.
To cancel the daily timer, press CANCEL after
performing step 1.
To set the daily timer with the same settings
again after canceling, press SET after
performing step 1.
25