Erase Function; All Erase Function - JVC UX-A70MDR Instructions Manual

ERASE Function

This function allows you to erase unwanted tracks.
• To stop any time during editing process, press
TITLE/EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE/EDIT repeatedly until "ERASE?"
appears in the main display.
The source is changed to "MD."
• Each time you press TITLE/EDIT, the edit mode
changes as follows:
DISC TITLE?
Playback mode
(canceled)
3
Press SET.
"1 ERASE?" appears in the main display.
4
Select the track you want to erase.
1) Press ¢ or 4.
• You can also press the number button(s) directly.
Ex. Track 2 is selected.
2) Press SET.
5
Repeat step 4 to select all the tracks you want to
erase.
• If you have selected a wrong track number, press
CANCEL, then select the correct track number.
• You can select up to 15 tracks.
6
Press ENTER.
"PUSH ENTER" appears in the main display.
7
Press ENTER to finish the editing procedure.
"EDITING" appears for a while, then "UTOCwriting"
flashes while the editing you have made is being
recorded on the MD.
MOVE ?
DIVIDE ? JOIN ?
ALL ERASE? ERASE?

ALL ERASE Function

This function allows you to erase all the tracks on an MD.
• To stop any time during editing process, press
TITLE/EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE/EDIT repeatedly until "ALL
ERASE?" appears in the main display.
The source is changed to "MD."
• Each time you press TITLE/EDIT, the edit mode
changes as follows:
DISC TITLE?
Playback mode
(canceled)
3
Press SET.
"PUSH ENTER" appears in the main display.
4
Press ENTER to finish the editing procedure.
"EDITING" appears for a while, then "UTOCwriting"
flashes while the editing you have made is being
recorded on the MD.
"BLANK DISC" appears in the main display.
– 37 –
MOVE ?
DIVIDE ? JOIN ?
ALL ERASE? ERASE?