Switching To A Program Type Of Your Choice Temporarily - JVC UX-A70MDR Instructions Manual

3
Press SELECT –/+ to select a PTY code.
The PTY code previously selected starts flashing in the
main display.
Ex. "News" is selected.
• Each time you press the button, the PTY codes
change as follows (refer also to the list on page 19):
News " Affairs " Info "Sport "
Educate " Drama " Culture "
Science " Varied " Pop M " Rock M "
Easy M " Light M " Classics "
Other M " Weather " Finance " Children "
Social " Religion " Phone In " Travel "
Leisure " Jazz " Country " Nation M "
Oldies " Folk M " Document " TEST "
Alarm! " (back to the beginning)
4
Press PTY again.
While searching, the selected PTY code and
"SEARCH" appear alternately in the main display.
Ex. When "News" is selected as the PTY code.
The unit searches 30 preset FM stations, stops when it
finds the one you have selected, and tunes in that
station.
5
Release your finger from RDS CONTROL.
To continue searching after the first stop:
Press PTY again when the indications on the display are flashing.
If no program is found, "NOT FOUND" appears in the main
display and the unit returns to the last received station.
To stop searching any time during the process:
Press PTY when searching.
Switching to a Program Type of Your Choice
Temporarily
The EON function allows the unit to switch temporarily to a
broadcast program of your choice (TA, News, or Info) from
a different station except when you are listening to a non-
RDS station — some FM stations and AM (MW/LW)
stations.
• The EON indicator lights while receiving a station with
the EON code.
• EON function is applicable only to preset stations.
On the remote control ONLY:
1
While listening to an FM station, press and hold
RDS CONTROL until you finish the following
procedure.
2
Press EON.
"EON SELECT" appears in the main display.
3
Press SELECT –/+ repeatedly until the EON data
type you want is selected.
The name of the selected EON data type starts flashing
in the main display, and the indicator appears on the
display.
• Each time you press SELECT –/+, the EON data
types change as follows:
OFF = TA = News = Info = (back to the beginning)
TA: Traffic announcement
News: News
Info: Programs the purpose of which is to impart
advice in the widest sense.
OFF: EON function is canceled.
4
Press EON again to set the EON data type.
5
Release your finger from RDS CONTROL.
To cancel the EON function, select OFF in step 3 above.
• If you cancel the EON function while receiving a
program selected by the EON function, the unit goes
back to the previously tuned station.
• You can also cancel the EON function by selecting
another source.
– 17 –