Table of Contents
Advertisement
FS-SD5R/FS-SD7R/FS-SD9R
1-10
Using the CD Player
a
6 Press the SET button.
Program order nurnbat
2
P
1. 2
onds)
a r
ig i Se
LY 2 | 357
f
|
Tola! playback lime of the programmed tracks
7 Repeat steps 5 and 6 to select the other
tracks for the program.
You can see the total playback time of programmed
tracks onthe display. Also, you can see the programmed
tracks on the music calendar.
8& Press the CD &/ button.
The System plays the tracks in the order you have pro-
grammed them
M8 You can skip to a particular program track by pressing the
hl or ®b1 button during Program Play.
To stop playing, press the M button once.
To confirm the programmed tracks while the CD
player is stopped, cach time press the 4
or Pt Dut-
ton; the tracks making up the program will successively be
displayed in the programmed order.
To delete ail the tracks in the program, in stop mode.
press the MJ button. Pressing the CD # button to open the
'Top Cover will also clear the programmed tracks.
To exit the program mode once, while ihe CD Player
is stopped, press the PROGRAM
button to tight off the
"PROGRAM" indicator.
© if he total playback time of the programmed tracks @x-
ceeds 99 minutes 59 seconds. the total playback time will
go out on the display.
© Ifyou tty (0 program the 33rd track, "MEMORY FULL" ap-
pears on the display for about 2 seconds.
To Modify the Program
Modify the contents of the program while the CD Player is
stopped.
Each time you press the CANCEL button, the last track in
the program is deleted. To add new tracks to the end of the
program. repeat above steps 5 10 7.
Using the Timers
English
Random Piay
'The tracks will play in no special order when you use this
mode.
4 Press the RANDOM button on the
Remote Control.
The "RANDOM" indicator lights up on the display.
2 Press the CD >/1 button.
'The tracks are played in random order.
To ekip a track during playback, press the Pei button
fo jump to the next track in the random sequence. Press the
Hed button to jump back to the start of a track being played.
To exit Random
Piay mode, while the CD Player is
stopped. press the RANDOM button to light off the "RAN-
DOM" indicator and carry out Normal Play. or press the CD
4 button 10 open the Top Cover.
Repeating Tracks
a
a
'You can repeat all tracks or individual track, as many limes
as you like.
Press the REPEAT button on the Remote Control.
'The Repeat indicator changes with each press of the button,
as shown below.
CC
ALL~blank display — (back
to the
beginning)
Cc
:
Repeats one track.
© ALL:
InNormal Play mode, repeats alll the tracks.
In Program Play mode, repeats all the tracks
in the program.
In Random Play mode, repeats all the tracks
in random order.
To exit Repeat mode, press ihe REPEAT button until the
Repeat indicator on the display goes out
IWln Random Play. C cannot be selected.
M Repeat mode remains in effect even when you change the
play mode.
SLEEP
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section
'The timers let you controt listening functions automatically.
Setting the Clock
+ Use the Unit's button to set the clock.
© When you plug the AC power cord into the wall outlet,
the time indication "0:00" blinks on the display.
'* The clock must be correctly set for the timers to work.
* The procedure must be completed within hwo minutes,
Othermse. the setting is cleared and must be repeated
from the beginning.
1 Press the | button.
Then, the Unit's top buttons appear.
iz ay
(for 2 seconds)
2 Press the CLOCK button on the Unit for
more than two seconds.
'The hour digit of the time indication rapidly blinks on
the display.
3 Press the p> or +4< button on the Unit
to set the hour.
Pressing the PH button moves the time forwards and
pressing the ted button moves it backwards. Hold
down the button to move the time rapidly
4 Press the CLOCK button.
The minute digits of the time indication rapidly blink on
the display.
§ Press the p> of ¢< button to set the
minute.
6 Press the CLOCK button.
The selected time is set and the seconds start counting
from 0.
& CAUTION:
* itt
i s a power failure, the clock loses its
re ii
setting
after about
20 minutes.
"0:00"
blinks on the disp!ay and the clock must be
reset.
The clock may gain or lose one fo two minutes per month.
Setting the Daily Timer
Once you have set the Daily Timer, the timer will be acti-
vated at the same time every day.
The Timer indicator on the display shows that the Daily
Timer you have set is in effect.
+ Use the Unit's button to set the timer.
* Perform each setting within 30 seconds Otherwise. set-
bing wil! be cleared and the procedure must 'be repeated
from the beginning.
sing External Equipments
Listening to External
Equipment
You can listen to external equipment such as MD recorder.
tumtable or other auxiliary.
WFirst make sure that the external equipment is properly
connected to the System. (See page 7).
14 Set the VOLUME control to the mini:
mum position.
2 Press the MD/AUX button.
"MD/AUX" appears on the display.
MO. AUS
3 Start piaying the external equipment.
4 Adjust the VOLUME contro! to the
desired listening level.
§ Apply sound effects, if you wish.
Press the AHB PRO buiton to reinforce the bass sound.
Press the BASS/TREBLF button on the Remote Control
to control the tone. (See "Tone Control" on page 10.)
To exit MD/AUX mode, you will automatically switch
out of MD/AUX mode when you select another source
+ For operation of the external equipment, refer 10 its in-
structions
19
Using the Timers
—————
Recording the System's Source
to External Equipment
You can record the System's source to external equipment
which is connected to the MD/AUX-IN/OUT or CD DIGI-
TAL OUT terminals of the System, such as cassette deck or
MD recorder, etc.
Mi First make sure that the external equipment is properly
connected to the System. (See page 7)
Play the System's CD Player or tune in to
a station.
88 The recording level is not affected by the VOLUME level
set by the System. Also it is not affected by the sound ef-
fects.
Note,
* For operation of the external equipment refer to its in-
structions,
1 Setting the ON time (Example: 10:15).
Press the TIMER button on the Unit for more than
Iwo seconds
:
'The Timer indicator lights up and the hour digit of the
current ON time blinks on the display
When the clock is not set, "CLOCK"
and "ADJUST™
appear alternately on the display. Set the clock first.
XN ' ¥:
a
ON
- 7 FAG
vu
©
Press the PH or Hd button on the Unit to set the
hour you want the Unit to come on.
Pressing the BP button moves the time forwards and
pressing the Kd button moves it backwards. Hold
down the button to move the time rapidly.
Nae
ON
-10+00
7y
xe
Press the TIMER button.
"The minute digits of the ON time blink on the display.
w
ON = 10+bO-
Set the minute you want the Unit to come on, using
the i
or Kd button.
vby
ON
10+15-
1 ~
2 Setting the OFF time (Example:
13:30).
. Press the TIMER button.
'The hour digit of the OFF time blinks on the display.
«The same time as the ON time will be automatically
set)
XN ' 4
OFF
-10+15
'Set the hour you want the chai to be tumed off, using
the tei or
ed button.
OFF
13815
is
©
2. Press the TIMER bution.
The minute digits of the OFF time blink on the dis-
play.
OFF
13
{+s
es
ets
21
Set the minute you want the Unit to be tured off, us-
ing the PP and ¢<4 buttons.
OFF
13:30
yes
3 Selecting the music source.
1. Press the TIMER button.
The "TUNER" or "CD" blinks on the display.
2. Press the Pe or Mé<@ button to select the music
source you want lo listen 10.
The dispiay changes as shown below.
TUNER—CO-(back to the beginning)
4 Setting the volume level.
1. Press the TIMER button.
The current volume setting blinks on the display.
2. Press the fe or had button to select the volume level.
-
The current volume level will be used.
O10 50 :When the timer is tumed on, the Volume
will be automatically set to the selected
level.
VOLUME -i5-
5 Press the TIMER button.
'The timer setting is completed and the display returns to
the display before you set the Timer. The Timer indica-
tor remains lit
6 Before turning off the System, prepare
the music source selected in step 3.
TUNER: Tune in to the desired station.
cD:
Insert a CD. (Playback will start from the first
track at Timer on.)
7 Press the «| button to tum off the Sys-
tem.
In standby mode, you can see the Timer indicator ( @ )
on the display.
* When the timer tums on, the Timer indicator starts
blinking and the prepared source in step 6 will be
played.
To cancel the timer, press the TIMER button. The
Timer indicator ( © ) goes out on the display.
To re-activate the cancelled timer. press the TIM-
ER button to light the Timer indicator ( © ).
At this time, you can see the current timer settings. Each
setting appears on the disptay for two seconds in the or-
der of ON time. OFF time, music source and volume.
To change the timer setting, repeat the setting pro-
cedure from the beginning.
4 CAUTION:
'
* if the System is unplugged, or a
power fail-
ure occurs, the timer setting will be lost.
You will need to reset the clock first, then
the timer.
4
Advertisement
Table of Contents
