Playing Back The Entire Md - Normal Play - JVC UX-A70MDR Instructions Manual

Playing Back the Entire MD — Normal Play
You can play an MD.
On the main unit ONLY:
1
Press MD OPEN/CLOSE 0.
The unit automatically turns on, the electronic swing
panel slides downward, then the MD loading slot
appears.
• If an MD is already in the MD loading slot, it will
eject.
2
Insert an MD into the MD loading slot.
The MD is pulled in, then the electronic swing panel
slides upward automatically.
The MD insertion indicator (
• When the current source is MD, the information on
the loaded MD appears in the main display as
follows:
Disk title (when the MD has a disc title)
Total track number
Ex. The MD has 12 recorded tracks.
3
Press MD # / 8.
The MD indicators flash on the display and MD
playback starts from the first track.
The recording length mode indicator (SP/LP2/LP4)*
lights on the display.
Insert an MD in the
same way as indicated
on the MD.
MD loading slot
) lights on the display.
Total playing time
Track number indicator
1 2 3 4
TRACK
SP
MD
The current track Elapsed playing time
Recording length mode indicator
Ex. The MD has 12 recorded tracks and the unit is
playing the first track in the SP mode.
• When the unit finishes playing a track, its track
number goes off from the track number indicator on
the display.
MD playback stops automatically after playing all the
tracks on the MD.
To stop during play, press 7.
To remove the disc, press MD OPEN/CLOSE 0.
While the unit is pulling in the MD:
• DO NOT press MD OPEN/CLOSE 0.
• DO NOT close the electronic swing panel by
force.
If the MD or track has a title
The title will appear in the main display. (If a title is long and
cannot be shown at a time, the unit scrolls the title to show the
entire title.)
* About recording length mode
MDs are played back in the same recording length mode as they
were recorded. When an MD starts playing, the playback mode of
the currently playing track lights on the display.
SP :
Indicates the tracks recorded in standard stereo recording
mode on this unit or those recorded on an MD recorder
incompatible with MDLP*.
LP2 : Indicates the tracks recorded in 2 times long-hour stereo
recording mode.
LP4 : Indicates the tracks recorded in 4 times long-hour stereo
recording mode.
* MDLP features a new sound compression method
(ATRAC3) and a 2 times (or 4 times) long-hour stereo
recording and playing function.
The MDLP logo is marked on the MD recorders and players
compatible with MDLP. It is also marked on MDs pre-
recorded in ATRAC3 (excluding recordable MDs.)
– 25 –
5 6 7 8 9 10 11 12
Flashing
CD