Turning On The Power; Selecting The Sources And Starting Play - JVC UX-A70MDR Instructions Manual

Turning On the Power

When you press the play button (CD # / 8, MD # / 8) or
the source selecting buttons such as FM/AM and AUX, the
unit automatically turns on (and starts playback if the
source is ready.)
To turn on the unit without playing, press
The STANDBY/ON lamp on the main unit lights green.
"HELLO" appears in the main display.
To turn off the unit (on standby), press
"SEE YOU" appears in the main display.
The STANDBY/ON lamp on the main unit lights red.
• "0:00" appears in the main display until you set the
built-in clock. After setting the clock, the clock time will
appear in the main display while the power is off.
• A little power is always consumed even while the unit is
in standby mode.
To set the built-in clock, see page 42.
To switch off the power supply completely, unplug the
AC power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock setting, the tuner preset stations and other settings will
be erased.

Selecting the Sources and Starting Play

To select the tuner as the source, press FM/AM.
The unit automatically turns on (when the unit is in
standby), and "FM" or "AM" appears in the main display
for a while.
The unit starts to tune in the last received station.
. • For more detailed operations, see pages 14 to 19.
To select the CD player as the source, press CD # / 8.
The unit automatically turns on (when the unit is in
standby), and "CD" appears in the main display for a while.
• Play will start if a CD is on the disc tray.
• "CD NO DISC" will appear in the main display if a CD
again.
is not loaded.
To stop playback, press 7.
• For more detailed operations, see pages 20 to 23.
To select the MD player as the source, press MD # / 8.
The unit automatically turns on (when the unit is in
standby), and "MD" appears in the main display for a
while.
• Play will start if an MD is in the MD loading slot.
• "MD NO DISC" will appear in the main display if an
MD is not loaded.
To stop playback, press 7.
• For more detailed operations, see pages 24 to 27.
To select the external equipment as the source, press
AUX.
The unit automatically turns on (when the unit is in
standby), and "AUX" appears in the main display for a
while.
• For operating the external equipment, see the manuals
supplied with them.
– 11 –