Move Function - JVC UX-A70MDR Instructions Manual

3
Press SET.
"– – – + 1 ?" appears in the main display.
4
Press ¢ or 4 to select the two adjacent tracks
you want to join.
• You can also press the number button(s) to directly
select the track you want to join.
Ex. When you want to join tracks 1 and 2.
5
Press SET.
"PUSH ENTER" appears in the main display.
• If you have selected wrong tracks, press CANCEL,
then select the correct tracks.
6
Press ENTER to finish the editing procedure.
"EDITING" appears for a while, then "UTOCwriting"
flashes while the editing you have made is being
recorded on the MD.
To divide the joined tracks, see the DIVIDE function.
If "CANNOT JOIN" appears in step
You cannot join the following tracks.
• Tracks recorded using different recording length modes (SP,
LP2, LP4). (See page 30)
• Digital-recording tracks and analog-recording tracks.
• Tracks recorded using monaural long recording method (not
possible on this unit) and stereo-recording tracks.

MOVE Function

This function allows you to move a track to the position
you prefer. It is useful to change the order of the tracks as
you like.
• To stop any time during editing process, press
TITLE/EDIT.
1
Insert an MD you want to edit into the MD loading
slot.
2
Press TITLE/EDIT repeatedly until "MOVE ?"
appears in the main display.
The source is changed to "MD."
• Each time you press TITLE/EDIT, the edit mode
changes as follows:
3
Press SET.
" +
4
Select the track you want to move.
1) Press ¢ or 4.
• You can also press the number button(s) directly.
2) Press SET.
5
5
Select the position where you want to move the
track to.
1) Press ¢ or 4.
• You can also press the number button(s) directly.
2) Press SET.
"PUSH ENTER" appears in the main display.
• If you have selected wrong tracks, press
6
Press ENTER to finish the editing procedure.
"EDITING" appears for a while, then "UTOCwriting"
flashes while the editing you have made is being
recorded on the MD.
– 36 –
DISC TITLE? DIVIDE ?
Playback mode
ALL ERASE?
(canceled)
1 ?" appears in the main display.
Ex. When you want to move track 2.
EX. When you want to move track 2 to
the position of track 7.
CANCEL, then select the correct tracks.
MOVE ?
JOIN ?
ERASE?