Programing The Playing Order Of The Tracks - Program Play - JVC UX-A70MDR Instructions Manual

Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
On the remote control ONLY:
1
Load a CD.
2
Press CD # / 8, then 7.
The source is changed to "CD."
3
Press PLAY MODE so that "CD PROGRAM"
appears in the main display.
The PRGM indicator lights on the display.
• Each time you press the button, play mode changes
as follows:
CD PROGRAM
Total track number & total playing time
(Normal play)
4
Press the number buttons to select the tracks.
• For how to use the number buttons, see "To go to
another track directly using the number buttons (on
the remote control ONLY)" on the previous page.
The selected track numbers
5 7
TRACK
CD
MD
The current track
Ex. Tracks 5, 7, and 9 have been programed.
• If you stop pressing the buttons for a while, the total
playing time will appear in the main display.
However, you can continue selecting the tracks.
5
Press CD # / 8.
The tracks are played in the order you have programed.
To stop during play, press 7.
The last programed track number and total playing time
appear in the main display.
CD RANDOM
9
PRGM
Step No.
To exit from Program play mode, press PLAY MODE
once or twice so that the unit enters another playback mode
(Normal play or Random play mode) before or after play.
To check the program contents
Before playing, you can check the program contents by
pressing 4 or ¢.
• 4 : Shows the programed tracks in the reverse order.
• ¢ : Shows them in the programed order.
To modify the program
Before playing, you can erase the last programed track by
pressing CANCEL on the remote control. Each time you
press the button, the last programed track is erased from the
program.
To add tracks in the program before you start play,
simply select track numbers you want to add.
To erase the entire program, press CD OPEN/CLOSE 0
to eject the CD.
• Turning off the unit will also erase the program.
If you try to program a 33rd step
"MEMORY FULL" will appear in the main display.
If your entry is ignored
You have tried to program a track number that does not exist on the
CD (for example, selecting track 14 on a CD that only has 12
tracks.) Such entries are ignored.
If the total playing time is 100 minutes or more
The total playing time will not be shown. ("– – : – –" will appear.)
– 22 –