6.1.5 Product Ecology Requirements; Restriction Of Hazardous Substances (Rohs) - Intel SSR212CC Technical Product Specification

Regulatory Information
Product safety label must be printed on UL approved label stock and printer ribbon.
Alternatively labels can be purchased from a UL approved label manufacturer.
The product must be marked with the correct regulatory markings to support the certifications
that are specified.
Product documentation shall incorporate all safety required information to conform to certifiers
and regulators and the certifications issued for the product.

6.1.5 Product Ecology Requirements

All materials, parts and subassemblies must not contain restricted materials as defined in Intel's
Environmental Product Content Specification of Suppliers and Outsourced Manufacturers –
http://supplier.intel.com/ehs/environmental.htm.
All plastic parts shall not use brominated flame retardant or any other halogenated retardants
that are not accepted by environmental programs such as Blue Angels, Nordic White Swan,
and Swedish TCO.
All plastic parts that weigh >25gm shall be marked with the ISO11469 requirements for
recycling. Example >PC/ABS< .
Packaging materials may not contain more than 100 ppm (total) of lead, cadmium, chromium or
mercury.
If sold as a retail product, packaging materials must be marked with applicable recycling logos
for Europe (green dot) and Japan (Eco-marks).
Product documentation shall incorporate all safety required information to conform to certifiers
and regulators and the certifications issued for the product.
All cords and cables shall contain < 100 ppm of cadmium.
6.2

Restriction of Hazardous Substances (RoHS)

Intel has a system in place to restrict the use of banned substances in accordance with the
European Directive 2002/95/EC. Compliance is based on declaration that materials banned in
the RoHS Directive are either (1) below all applicable substance threshold limits or (2) an
approved/pending RoHS exemption applies.
Note: RoHS implementing details are not fully defined and may change.
Threshold limits and banned substances are noted below.
Quantity limit of 0.1% by mass (1000 PPM) for:
o Lead
o Mercury
o Hexavalent Chromium
o Polybrominated Biphenyls Diphenyl Ethers (PBDE)
Quantity limit of 0.01% by mass (100 PPM) for:
o Cadmium
34 Revision 1.2
Intel® Storage System SSR212CC